1.254.773.3080
3115 Lucius McCelvey Dr,
Temple, TX 76504

Catalog

Type
STIFFNESS
MELT POINT
ESD
FLEX
FR
CN
RE
TPE 310

This TPU is 84 ShoreA and is an excellent choice for Digital Foam™ applications. ALM has extensive experience processing this powder, and it has excellent recyclability.

  • Soft, white parts out of the machine
  • Extreme elongations achievable without permanent deformation
  • 100% recyclable
datasheet
PEKK 100

Unfilled PEKK combining high impact strength while maintaining high tensile strength.

  • High chemical resistance at high operating temperatures
  • Replacement of injection moulded PA 6 GF (glass fiber filled Polyamide 6)
  • High dielectric strength
  • Material inherent flame retardancy (UL 94-V0)
TPE 410

TPE 410 is designed for a variety of different applications which require a strong durable yet flexible material. It’s ideal for short series production work for elastic parts that will see a variety of applications.

  • High impact resistance at lower temperatures
  • Excellent processability without the requirement of pretreatment
  • Low energy loss in a wide variety of temperature ranges
PA 850

Melt mixed black PA 11 that is formulated for easy processing. Tightly controlled particle distribution creates a smooth surface finish and excellent feature detail.

  • Parts exhibit excellent mechanical properties
  • Easy to process on most laser sintering platforms
  • Specially formulated for properties to be achieved using a single scan
PA 860

White PA 11 that is formulated for easy processing across all LS platforms. Tightly controlled particle distribution creates a smooth surface finish and excellent feature detail.

  • Smooth surface finish nylon 11 with small feature resolution
  • Parts exhibit excellent mechanical properties
  • Specially formulated for properties to be achieved using a single scan
PA D80-ST

Unfilled, color stabilized nylon 11 material that is also stabilized to prevent premature thermal degradation. Parts produced from PA D80-ST exhibit superior mechanical properties.

  • Economical nylon 11
  • Parts withstand intense functional testing
  • Parts are approved for end-use production applications
  • Stabilized against thermal degradation to reduce oxidation of sintered parts
HP 11-30

Well suited to applications which require superior thermal properties, with maximum performance and consistent properties in XY&Z dimensions.

  • Isotropic properties
  • Melt compounded carbon fiber filled PA11
  • High stiffness, high tensile strength
  • Electrostatically dissipative
HP 11-32 FE

A well suited material where the application requires superior thermal strength in the X, Y, and Z dimensions. The material offers high stiffness and high tensile strength. Excellent material for Wind Tunnel models and under the hood automotive applications.

  • Isotropic properties
  • Melt compounded carbon fiber filled PA 11 with dry-mixed fibers
  • High stiffness, high tensile strength
PA 803-CF Black

Highly-Carbon-Fiber-Filled Nylon 11 optimized for high-performance.

  • High-detail black surface finish
  • Good stiffness and mechanical properties
  • Warping resistance at elevated temperatures
datasheet
PA 820-MF CN

Mineral-Fiber-Filled nylon 11 optimized for high performance and certified as carbon neutral through the entire material supply chain all the way to your door.

  • Carbon neutral and low emissions
  • Good stiffness and mechanical properties
  • Easy to process
  • High temperature tolerance
PA 840-GSL Black

Engineered for excellent mechanical properties, part definition and surface finish. Stabilized against thermal degradation resulting in little or no scrap material.

  • Best strength to weight ratio properties of any LS material
  • Reduced monomer outgassing compared to other nylon 11’s
  • Excellent surface finish and detail
PA 802-CF CN

Black carbon fiber filled nylon 11 optimized for high performance and certified as carbon neutral through the entire material supply chain all the way to your door.

  • Carbon neutral and low emissions
  • Black carbon fiber filled nylon 11
  • Superior stiffness and mechanical properties
  • Excellent resistance to warping at elevated temperatures
PA 830-ESD 12

This nylon 11 based material uses graphite for its electrostatic-dissipative (ESD) properties and contains no carbon fibers.

  • Electrostatically dissipative nylon 11 without carbon fibers
  • Good tensile strength and toughness
  • Easy to machine, less abrasive, and excellent surface finish
FR-106

The parts produced from FR-106 exhibit superior mechanical properties, while maintaining high levels of fire retardancy.

  • Fire retardant nylon 11
  • Only LS material certified to pass the FAR 25.853 60 second vertical burn requirement
  • Parts withstand intense functional testing
  • Parts are approved for end-use production applications
PA 250

Unfilled Nylon 12 optimized for excellent mechanical properties, part definition, and surface finish.

  • Smooth surface finish
  • Fine-feature resolution
  • High recyclability
PA 650

Unfilled Nylon 12 optimized for easy processing and as a drop-in replacement for comparable Unfilled Nylon 12’s.

  • Biocompatible and good recyclability
  • Clean white surface finish
  • Fine-feature resolution
  • User-friendly processing
PA 602-CF

23% Carbon-Fiber-Filled Nylon 12 optimized for stiffness and sustainable accuracy at elevated temperatures.

  • High-detail surface finish
  • Fine-feature resolution
  • Dimensional stability at elevated temperatures
PA 603-CF

33% Carbon-Fiber-Filled Nylon 12 optimized for a smooth surface finish without sacrificing feature details.

  • High-detail black surface finish
  • Good stiffness and mechanical properties
  • Warping resistance at elevated temperatures
PA 640-GSL

Hollow Glass-Sphere-Filled Nylon 12 optimized for stability, recyclability, and increased stiffness.

  • High-detail dark grey surface finish
  • Good strength-to-weight ratio properties
  • ~10% reduction of material-per-build compared to similar Nylon 12s
PA 605-A

40% Aluminum-Filled Nylon 12 optimized for easy processing and as a drop-in replacement for comparable aluminum-filled materials.

  • Metallic-grey surface finish
  • Good thermal and mechanical properties
  • High recyclability
PA 620-MF

25% Mineral-Filled Nylon 12 optimized for easy processing and as a drop-in replacement for comparable Fiber-Filled Nylon 12’s.

  • High-detail surface finish
  • Thermal resistance
  • Anisotropic mechanical properties
PA 616-GS

50% Glass-Sphere-Filled Nylon 12 optimized for higher temperature applications compared to unfilled nylons.

  • Smooth surface finish
  • Good stiffness and mechanical properties
  • Powder-flow-optimized for EOS P-Systems
PA 615-GS

50% Glass-Sphere-Filled Nylon 12 optimized for easy processing and as a drop-in replacement for comparable Glass-Sphere-Filled Nylon 12’s.

  • Smooth surface finish
  • Good stiffness and mechanical properties
  • High recyclability
PA 614-GS

40% Glass-Sphere-Filled Nylon 12 optimized for easy processing and as a drop-in replacement for comparable Glass-Sphere-Filled Nylon 12’s.

  • Long-term wear resistance
  • Good stiffness and mechanical properties
  • High recyclability
PA 415-GS

40% Glass-Sphere-Filled Nylon 12 optimized for material stabilized against thermal degradation and scrap material reduction.

  • Long-term wear resistance
  • Good stiffness and mechanical properties
  • High recyclability
PA 606-FR

The only commercially available Fire Retardant Nylon 12 that meets the FAR 25.853 60 second burn specification.

  • Smooth surface finish
  • Fine-feature resolution
  • Accurate, repeatable part quality
HT-23

The HT-23 is based on a PEKK resin with 23% Carbon Fiber compounded in and ground to a fine powder.

  • Isotropic properties
  • Melt compounded Carbon Fiber filled PEKK
  • Chemical resistant
  • Inherently flame retardant
TPE 210-S

TPE 210-S exhibits good feature definition and infiltration with polyurethane will impart even higher toughness and abrasion resistance.

  • Soft, white parts out of the machine
  • Extreme elongations achievable without permanent deformation
  • Easy to infiltrate to obtain maximum properties
  • 100% recyclable
TPE 300

This TPU is 92 ShoreA. ALM has extensive experience processing this powder, and it has excellent recyclability.

  • Soft, white parts out of the machine
  • Extreme elongations achievable without permanent deformation
  • Easy to infiltrate to obtain maximum properties
  • 100% recyclable
TPE 360

This CoPolyester material has excellent physical properties, is easy to process and has 100% recyclability.

  • Soft, white parts out of the machine
  • Easy to process
  • Toughness and flexibility
  • 100% recyclable

Let our team identify or engineer
the perfect solution for your application.